No, looks like it has CAD. Thanks for the input. Looked closely again at the manual and 2-4H synchro specs a 0.3 mm gap...so I doubt a neutral detent is possible on the 'active track'. Ran into possible issue with the shifter position today. Since it will now be 2.75" back, not sure if it will fit in through the floor. The shifter on the RHD case has a forward overlap of about 2". I looked around online for maybe a 4cyl case and did see a Montero sport t-case that had a similar overlap of the shifter, but it looked shorter and did not have the same # of sensors. Anyone know the differences in t-cases? Could I use a different type? Leaning toward cutting larger hole in the floor if necessary...Current hole is huge 3" wide by 5-6"long and shifter was toward the front.