|
|
 axle breathers
#1012988
11/15/10 01:44 AM
|
Joined: Jan 2001
Posts: 3,876
OP
Roll Me Over
|
Long time ago I saw a product that you hooked to your axle breather outlet for just about any axle and instead of a tube it was just a piece of plastic that expanded and contracted with the air. Anyone know where to find them?
89 2dr 3.0 AT, manual hubs. 33x12.5 MT gen 2 coils,Cranked front tbars Dons rocker protection, Front/Rear Bumpers. ARB rear locker, 2" BL, Beefed up skid plates/trailing arms. Gen II uca, 2 Bouncy seats www.youtube.com/TagGeorge
|
|
|
Re: axle breathers
[Re: Tag]
#1012989
11/15/10 02:00 AM
|
Joined: Feb 2000
Posts: 6,247
Trail Leader
|
K&N does (or did) have a small filter that had a fitting to connect to a rubber tube. Haven't looked into it for about 15 years.
Not sure if that is what you are looking for...
|
|
|
Re: axle breathers
[Re: Tag]
#1012990
11/15/10 02:55 AM
|
Joined: May 2000
Posts: 6,132
Trail Leader
|
Sounds like a bellow that changes volume. Never seen one for axles, but I'm familiar with the concept.
87 Turbo Intercooled Raider, roller cam, torsen rear diff, LSD front diff, lockup auto with modified converter, V6 brakes, low transfer case gears...
|
|
|
Re: axle breathers
[Re: Kevin C]
#1012991
11/15/10 04:24 AM
|
Joined: Jan 2001
Posts: 3,876
OP
Roll Me Over
|
Sounds like a bellow that changes volume. Never seen one for axles, but I'm familiar with the concept. yep that is a good term for it. I have seen them but had no interest in them at the time.
89 2dr 3.0 AT, manual hubs. 33x12.5 MT gen 2 coils,Cranked front tbars Dons rocker protection, Front/Rear Bumpers. ARB rear locker, 2" BL, Beefed up skid plates/trailing arms. Gen II uca, 2 Bouncy seats www.youtube.com/TagGeorge
|
|
|
Re: axle breathers
[Re: Tag]
#1012992
11/15/10 04:51 AM
|
Joined: Apr 2006
Posts: 1,412
Body Damage is Cool
|
|
1991 Mitsubishi Pajero XP TD LWB family hauler.
|
|
|
Re: axle breathers
[Re: Tag]
#1012993
11/15/10 01:57 PM
|
Joined: May 2000
Posts: 1,956
Body Damage is Cool
|
I've seen balloons used quite often.
Two MRI's and a CAT scan....it's confirmed. I'm just not right in the head.
|
|
|
Re: axle breathers
[Re: lee_raider]
#1012994
11/15/10 04:17 PM
|
Joined: Aug 2003
Posts: 2,854
Roll Me Over
|
|
89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim
|
|
|
Re: axle breathers
[Re: Greg_Canada]
#1012995
11/15/10 06:44 PM
|
Joined: Jan 2000
Posts: 16,227
Web Wheeler
|
You'll probably want to check the clearance during full compression on either side and ensure this doesn't get compressed once it's mounted.
|
|
|
|
