Quote
I bought a set of wheels (American Eagle Type 54's) that were from a 4wd Tacoma. Unfortunately they wouldn't fit the Montero w/out some grinding to make them just a bit wider so not all rims that fit Toyota's will fit Montero's.

Perhaps 4runner and landcruiser hubs are slightly bigger?

Just double-check before you buy. <img src="/forums/images/graemlins/kewl.gif" alt="" />


Yeah, what he said! Measure the outside diameter of your front hubs, or the inside center opening on your spare wheel, should be the same. With that measurement, along with the bolt pattern, you should be able to figure out what aftermarket or wheels from another manufacturer will fit. Just went out and measured the center opening on my factory spare steel wheel, and it's 4.25" / 107mm.


1989 Monty SWB, 2.6L w/MT, 15" alloys, 265/75 Dunlop Radial rovers, rear air shocks, Weber 32/36, SQ oil cooler, (SOLD Oct 2012)
Southeast VA, USA