I'm gonna need to extract, rate these drill bits if you can....

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Register Log In 4x4Wire TrailTalk Forums Mitsubishi 4x4 and SUV Tech I'm gonna need to extract, rate these drill bits if you can....

Print Thread

Rate Thread

Re: I'm gonna need to extract, rate these drill bits if you can.... [Re: hazy_daze] #1013562 11/24/10 08:28 AM

Joined: Sep 2002

Posts: 3,634

Milwaukee WI

bretwalda

Roll Me Over

Home Depot has some bits from Ridgid called Cryo Cobalt bits. They are silver in color. After losing an edge quickly drilling out a couple of the 50+ spot welds on my T&C's strut tower fix with the regular cobalt bits - this bit buzzed through them incredibly. The only catch is they are a lot more brittle - so keep your drill line straight.

No LH as far as I know - never extracted that way.

concreteprinter.com

Entire Thread
Subject	Posted By	Posted
I'm gonna need to extract, rate these drill bits if you can....	Rafterman191	11/23/10 08:52 PM
Re: I'm gonna need to extract, rate these drill bits if you can....	off-roader	11/23/10 10:13 PM
Re: I'm gonna need to extract, rate these drill bits if you can....	mineitnow	11/24/10 12:46 AM
Re: I'm gonna need to extract, rate these drill bits if you can....	hazy_daze	11/24/10 04:02 AM
Re: I'm gonna need to extract, rate these drill bits if you can....	bretwalda	11/24/10 08:28 AM
Re: I'm gonna need to extract, rate these drill bits if you can....	Bernoulli	11/25/10 01:11 AM
Re: I'm gonna need to extract, rate these drill bits if you can....	off-roader	11/25/10 03:19 AM
Re: I'm gonna need to extract, rate these drill bits if you can....	Bernoulli	11/26/10 04:32 AM
Re: I'm gonna need to extract, rate these drill bits if you can....	Rafterman191	11/24/10 04:26 PM
Re: I'm gonna need to extract, rate these drill bits if you can....	fasteddy	11/24/10 08:58 PM
Re: I'm gonna need to extract, rate these drill bits if you can....	Mo95sr	11/25/10 10:57 AM
Re: I'm gonna need to extract, rate these drill bits if you can....	Rafterman191	11/26/10 05:30 AM
Re: I'm gonna need to extract, rate these drill bits if you can....	sasnydley	11/26/10 04:15 PM
Re: I'm gonna need to extract, rate these drill bits if you can....	Kevin C	11/26/10 06:29 PM
Re: I'm gonna need to extract, rate these drill bits if you can....	fasteddy	11/27/10 02:38 AM
Re: I'm gonna need to extract, rate these drill bits if you can....	Rafterman191	11/28/10 06:15 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.483s Queries: 16 (3.481s) Memory: 0.6282 MB (Peak: 0.6612 MB) Data Comp: Off Server Time: 2026-06-06 15:35:38 UTC
Valid HTML 5 and Valid CSS