I'm gonna need to extract, rate these drill bits if you can....

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Register Log In 4x4Wire TrailTalk Forums Mitsubishi 4x4 and SUV Tech I'm gonna need to extract, rate these drill bits if you can....

Print Thread

Rate Thread

Re: I'm gonna need to extract, rate these drill bits if you can.... [Re: Kevin C] #1013572 11/27/10 02:38 AM

Joined: Jan 2001

Posts: 13,649

Helen , GA

fasteddy

Web Wheeler

The good steel better be in the extractor. Ever try to drill one out? Start the hole with a 1/8" or smaller, and step up in size. I have the best luck with spiral fluted extractors.

I find that if I put the extractor under torque just short of strip out, then tap the extractor sharply, it will break loose the fastener stub most of the time.

Not responsible for advice not taken...

Entire Thread
Subject	Posted By	Posted
I'm gonna need to extract, rate these drill bits if you can....	Rafterman191	11/23/10 08:52 PM
Re: I'm gonna need to extract, rate these drill bits if you can....	off-roader	11/23/10 10:13 PM
Re: I'm gonna need to extract, rate these drill bits if you can....	mineitnow	11/24/10 12:46 AM
Re: I'm gonna need to extract, rate these drill bits if you can....	hazy_daze	11/24/10 04:02 AM
Re: I'm gonna need to extract, rate these drill bits if you can....	bretwalda	11/24/10 08:28 AM
Re: I'm gonna need to extract, rate these drill bits if you can....	Bernoulli	11/25/10 01:11 AM
Re: I'm gonna need to extract, rate these drill bits if you can....	off-roader	11/25/10 03:19 AM
Re: I'm gonna need to extract, rate these drill bits if you can....	Bernoulli	11/26/10 04:32 AM
Re: I'm gonna need to extract, rate these drill bits if you can....	Rafterman191	11/24/10 04:26 PM
Re: I'm gonna need to extract, rate these drill bits if you can....	fasteddy	11/24/10 08:58 PM
Re: I'm gonna need to extract, rate these drill bits if you can....	Mo95sr	11/25/10 10:57 AM
Re: I'm gonna need to extract, rate these drill bits if you can....	Rafterman191	11/26/10 05:30 AM
Re: I'm gonna need to extract, rate these drill bits if you can....	sasnydley	11/26/10 04:15 PM
Re: I'm gonna need to extract, rate these drill bits if you can....	Kevin C	11/26/10 06:29 PM
Re: I'm gonna need to extract, rate these drill bits if you can....	fasteddy	11/27/10 02:38 AM
Re: I'm gonna need to extract, rate these drill bits if you can....	Rafterman191	11/28/10 06:15 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.741s Queries: 16 (3.739s) Memory: 0.6287 MB (Peak: 0.6616 MB) Data Comp: Off Server Time: 2026-06-03 20:39:10 UTC
Valid HTML 5 and Valid CSS