the mounts do sit flush, but the raider only has about a 1in rise in the back and the xterra has a 2in. So I will need to fab up an extention or spacer for the middle and back feet. in the pic, I have a 3\4in piece of wood as a spacer. Nothing is bolted down, no holes drilled yet, just dry fitting it. I also cut out about 16in of pipe to get it to fit on the truck.

'88 Raider. 2.6L dead...2.4L swap in progress, AT, 33's, 2 bouncy seat,AC, CC, 2.25 exh, 2" Tbar, 2" BL, rear DB, rear LSD,4.90's, SW hubs,gen2 uca's, KYB shocks, snorkel, elec fan, MSD.

'99 chev k3500 crewcab
'15 Subaru XV
'03 BMW i325