Balance shaft bearings remove/install special tool?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Balance shaft bearings remove/install special tool? [Re: slowlane] #1016348 12/28/10 06:48 AM

Joined: Apr 2006

Posts: 1,193

Bouse az

mxmikie

Body Damage is Cool

if the motor is out you can use a cam bearing install tool i have the factory bearing install/removal tool

it dosent have to be surrounded by water to be an island

Entire Thread
Subject	Posted By	Posted
Balance shaft bearings remove/install special tool?	slowlane	12/28/10 06:33 AM
Re: Balance shaft bearings remove/install special tool?	mxmikie	12/28/10 06:48 AM
Re: Balance shaft bearings remove/install special tool?	fasteddy	12/28/10 06:56 AM
Re: Balance shaft bearings remove/install special tool?	slowlane	12/28/10 05:27 PM
Re: Balance shaft bearings remove/install special tool?	Engine_Machine_Ser	01/01/11 01:51 AM
Re: Balance shaft bearings remove/install special tool?	slowlane	01/03/11 06:37 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.941s Queries: 16 (3.438s) Memory: 0.6031 MB (Peak: 0.6361 MB) Data Comp: Off Server Time: 2026-06-01 16:46:14 UTC
Valid HTML 5 and Valid CSS