Balance shaft bearings remove/install special tool?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Balance shaft bearings remove/install special tool? [Re: fasteddy] #1016350 12/28/10 05:27 PM

Joined: Dec 2009

Posts: 22

slowlane

Need a Spot

I was entertaining the idea of replacing since they're relatively inexpensive. Oil pressure seems fine as of now.

Just about all of what I read here regarding balance shafts is within the debate of eliminating or not eliminating.

1988 Raider SWB 2.6L, 5 speeds of awesomeness.
1997 Montero SR (winter), a bit of a project.

Entire Thread
Subject	Posted By	Posted
Balance shaft bearings remove/install special tool?	slowlane	12/28/10 06:33 AM
Re: Balance shaft bearings remove/install special tool?	mxmikie	12/28/10 06:48 AM
Re: Balance shaft bearings remove/install special tool?	fasteddy	12/28/10 06:56 AM
Re: Balance shaft bearings remove/install special tool?	slowlane	12/28/10 05:27 PM
Re: Balance shaft bearings remove/install special tool?	Engine_Machine_Ser	01/01/11 01:51 AM
Re: Balance shaft bearings remove/install special tool?	slowlane	01/03/11 06:37 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.439s Queries: 16 (3.436s) Memory: 0.6038 MB (Peak: 0.6367 MB) Data Comp: Off Server Time: 2026-06-03 02:20:32 UTC
Valid HTML 5 and Valid CSS