Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Re: Replaced vacuum hoses, now what? [Re: Airdale73013] #1016387 12/30/10 07:16 PM
Joined: Dec 2010
Posts: 7
M
Moffe Offline OP
Need a Spot
Warn Hubs ordered but wanted to see if I could fix it before they arrived. No big cost to replace the hoses. But I put my trust in those Manuals instead.

Re: Replaced vacuum hoses, now what? [Re: Moffe] #1016388 12/31/10 05:53 AM
Joined: Feb 2003
Posts: 2,243
DamKia Offline
Kia Moderator
What you can do with the old vac hubs is to disassemble them and reassemble them with the spring on the other side of the slider so that are always on and carry them as replacements if the new Warns give trouble.


2002 Sporty , Ironman 2.5" spring, 2" body, 15 x 7 ROH wheels, K&N, 15 x 10.5 Simex Centipedes, Powerchip 91.

"Never argue with an idiot. They will bring you down to their level then beat you with experience!"
Re: Replaced vacuum hoses, now what? [Re: DamKia] #1016389 12/31/10 09:07 AM
Joined: Dec 2009
Posts: 433
Sportege_Panicmech Offline
Mudrunner
Side note. Shop owner where I work found a warn manual hub on the side of the road. It looks like it was to a early 90's F150 or bronco. Someone didn't get the Axle spline retainer clip on all the way into the groove to the whole thing just slipped off apparently. Someone out there is probably pissed. now they gotta buy another set! Least they'll have a spare if it happens again. <img src="/forums/images/graemlins/rolleyes.gif" alt="" />

Page 2 of 2 1 2

Moderated by  4x4Wire, Axe Man, DamKia 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.003s) Memory: 0.6004 MB (Peak: 0.6535 MB) Data Comp: Off Server Time: 2026-05-25 20:04:48 UTC
Valid HTML 5 and Valid CSS