3.0 v6 cylinder head question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3.0 v6 cylinder head question [Re: fasteddy] #1016392 12/29/10 04:26 AM

Joined: Sep 2010

Posts: 3

oakland, ca

sds1967

Need a Spot

Thanks Eddy -

Yes...on closer inspection, these appear to be bronze sleeves. The funny thing is that all the exhaust guides and sleeves look fine, but 4 of the sleeves have worked themselves out on the intake side.

But a guess the bottom line is the same...replace the valve guides, right?

Thanks again for your help!

Scott
1989 LWB Montero 3.0 auto 31/10.5

Entire Thread
Subject	Posted By	Posted
3.0 v6 cylinder head question	sds1967	12/28/10 11:26 PM
Re: 3.0 v6 cylinder head question	fasteddy	12/29/10 03:50 AM
Re: 3.0 v6 cylinder head question	sds1967	12/29/10 04:26 AM
Re: 3.0 v6 cylinder head question	TobyB	01/10/11 03:26 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.606s Queries: 16 (3.604s) Memory: 0.5992 MB (Peak: 0.6322 MB) Data Comp: Off Server Time: 2026-06-19 03:20:27 UTC
Valid HTML 5 and Valid CSS