|
|
|
|
Re: engine compatibility
[Re: Mudraider]
#1016617
01/14/11 08:23 PM
|
Joined: May 2010
Posts: 307
Mudrunner
|
Found this posted on a Pajero forum from OZ. This has to be one of the cleanest V8 conversions I've ever seen! I had no idea what a Toyota 1UZ-FE engine was, until the end of the video, when they show it stuffed inside the engine comparment. Nicely done! If they can make that 32-valve V8 fit, then surely a 289 or 302 would be an easier fit?! http://www.youtube.com/user/turbopanda
 1989 Monty SWB, 2.6L w/MT, 15" alloys, 265/75 Dunlop Radial rovers, rear air shocks, Weber 32/36, SQ oil cooler, (SOLD Oct 2012) Southeast VA, USA
|
|
Re: engine compatibility
[Re: socal1200r]
#1016618
01/15/11 12:22 AM
|
Joined: May 2007
Posts: 4,628
Roll Me Over
|
Except that a 1UZ-FE is a 4.0L DOHC instead of a 4.7 or 5.0 pushrod motor. There's a huge size difference in the packaging. IIRC something like 4-6 inches in all directions smaller...
Fasteddy's advice is occasionally sound...
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5954 MB (Peak: 0.6438 MB) Data Comp: Off Server Time: 2026-06-09 23:08:05 UTCValid HTML 5 and Valid CSS