engine compatibility

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: engine compatibility [Re: socal1200r] #1016618 01/15/11 12:22 AM

Joined: May 2007

Posts: 4,628

Buford, Georgia

hazy_daze

Roll Me Over

Except that a 1UZ-FE is a 4.0L DOHC instead of a 4.7 or 5.0 pushrod motor. There's a huge size difference in the packaging. IIRC something like 4-6 inches in all directions smaller...

Fasteddy's advice is occasionally sound...

Entire Thread
Subject	Posted By	Posted
engine compatibility	Thor	12/31/10 02:57 AM
Re: engine compatibility	Mudraider	12/31/10 04:29 AM
Re: engine compatibility	Spook	12/31/10 12:56 PM
Re: engine compatibility	off-roader	12/31/10 04:41 AM
Re: engine compatibility	JohnnyBfromPeoria	12/31/10 05:10 PM
Re: engine compatibility	Kevin C	12/31/10 05:37 PM
Re: engine compatibility	Mudraider	01/01/11 12:44 AM
Re: engine compatibility	socal1200r	01/14/11 08:23 PM
Re: engine compatibility	hazy_daze	01/15/11 12:22 AM
Re: engine compatibility	Kevin C	12/31/10 07:40 AM
Re: engine compatibility	airbats801	12/31/10 10:04 AM
Re: engine compatibility	TobyB	01/10/11 03:19 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.600s Queries: 16 (3.597s) Memory: 0.6173 MB (Peak: 0.6503 MB) Data Comp: Off Server Time: 2026-06-20 17:47:40 UTC
Valid HTML 5 and Valid CSS