Valve build up

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Valve build up [Re: OldColt] #1016939 01/04/11 05:45 PM

Joined: Jan 2001

Posts: 13,649

Helen , GA

fasteddy

Web Wheeler

I concur. I'd scrape/wirebrush/clean the vavle head if the seats and valve seat contact ring is clean and tight, just to get rid of potential hot spots that could cause preignition. I didn't see a problem crack. If there wasn't an incipient crack there, I'd worry...

Not responsible for advice not taken...

Entire Thread
Subject	Posted By	Posted
Valve build up	RyanB	01/04/11 01:22 AM
Re: Valve build up	Engine_Machine_Ser	01/04/11 12:06 PM
Re: Valve build up	OldColt	01/04/11 04:46 PM
Re: Valve build up	fasteddy	01/04/11 05:45 PM
Re: Valve build up	RyanB	01/04/11 11:52 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.490s Queries: 16 (3.487s) Memory: 0.6014 MB (Peak: 0.6344 MB) Data Comp: Off Server Time: 2026-06-19 04:43:31 UTC
Valid HTML 5 and Valid CSS