also try searchtempest.com to search multiple CL cities.
The optimal recipient for a turbo conversion is the a/t, in my opinion. There seems to be an almost perfect match between the a/t comverter stall characteristics and the onset of boost pressure to almost avoid turbo lag altogether. Ditto the use of a 90.5 or later a/t with the lockup converter with the 4cyl bellhousing. Of course, you will have to swap the flywheel of a m/t donor motor to the truck flexplate and crank end adapter, and remove the pilot bearing from the rear crank recess, to use an m/t starquest motor in an a/t truck, but it's a straight bolt on.
Note that in the tech threads stickied at the top is a complete turbo conversion bible started by me with contributions from many that gives very complete instructions and alternate methods and discussions of the best donors (the 88-89 a/t starquests) and the acceptable donors.
I did my first 2.6 turbo conversion years ago with no internet, two factory shop manuals, and an 85 4wd mitsu pickup and an 85 conquest donor. I spent weeks sitting in the driveway with two sets of wiring diagrams and two snarls of unwrapped wiring harnesses and lots of hurled tools. It's LOTS easier now, all figured out, by smarter people than me.
Your strategy of finding a 4cyl truck and saving the pennies until you find a donor, then rebuilding the donor motor, all while still driving the recipient is very sound and leaves the minimal downtime.
I've seen non running donors for as little as $500 asking, which is what I paid for mine years ago. I've recently seen several with only minor problems in the 1000-2000 range asking price. Get a whole donor vehicle, it's lots easier than trying to source all the bits.