the oil solenoid I bought from napa(i think) LINK . basically, you pull out the oil sending unit from the block, put in a T fitting, put the sending unit in one side the solenoid in the other. You then have 3 wires to hook up. one from the starter system, one switched pwr and one that goes to the pump.

Last edited by zarktheshark; 02/08/11 06:46 PM.
'88 Raider. 2.6L dead...2.4L swap in progress, AT, 33's, 2 bouncy seat,AC, CC, 2.25 exh, 2" Tbar, 2" BL, rear DB, rear LSD,4.90's, SW hubs,gen2 uca's, KYB shocks, snorkel, elec fan, MSD.

'99 chev k3500 crewcab
'15 Subaru XV
'03 BMW i325