Weber conversion for 2.6l

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Weber conversion for 2.6l [Re: zarktheshark] #1019995 02/08/11 07:42 PM

Joined: Jul 2004

Posts: 546

Tulsa, Ok

Jamez

Rock Warrior

Make sure you have a solid ground for the pump. Using the mounting bolt may or may not work well so either check it with a meter beforehand or just run a ground wire with the power.

'87 Raider w/rebuilt 2.6
Weber 32/36

Entire Thread
Subject	Posted By	Posted
Weber conversion for 2.6l	RyanB	02/07/11 05:08 AM
Re: Weber conversion for 2.6l	zarktheshark	02/07/11 05:35 AM
Re: Weber conversion for 2.6l	RyanB	02/08/11 01:41 AM
Re: Weber conversion for 2.6l	zarktheshark	02/08/11 05:54 PM
Re: Weber conversion for 2.6l	Jamez	02/08/11 07:42 PM
Re: Weber conversion for 2.6l	RyanB	02/09/11 01:45 AM
Re: Weber conversion for 2.6l	Smalltimedodge	02/09/11 02:02 AM
Re: Weber conversion for 2.6l	socal1200r	02/09/11 02:11 AM
Re: Weber conversion for 2.6l	zarktheshark	02/09/11 02:36 AM
Re: Weber conversion for 2.6l	Skibane	02/16/11 04:51 AM
Re: Weber conversion for 2.6l	RyanB	02/17/11 01:07 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.502s Queries: 16 (3.500s) Memory: 0.6157 MB (Peak: 0.6486 MB) Data Comp: Off Server Time: 2026-06-07 22:58:22 UTC
Valid HTML 5 and Valid CSS