Oil pan clearance

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Oil pan clearance #1020449 02/12/11 04:25 AM

Joined: Aug 2005

Posts: 58

East Tennessee

krb90

Getting the Wheeling Fever

Hey guys....Can anyone tell me what the clearance needs to be between the oil pan and '89-95 IFS front axle? Just enough to fit, or should there be a couple inches between the two.

If your curious, I'm doing a Chevy v8 (383) swap. Making my own motor mounts. Low profile Chevy oil pan.

Last edited by krb90; 02/12/11 06:45 AM.

Entire Thread
Subject	Posted By	Posted
Oil pan clearance	krb90	02/12/11 04:25 AM
Re: Oil pan clearance	Greg_Canada	02/12/11 10:14 PM
Re: Oil pan clearance	krb90	02/15/11 12:43 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.395s Queries: 15 (3.393s) Memory: 0.5961 MB (Peak: 0.6291 MB) Data Comp: Off Server Time: 2026-05-28 02:35:18 UTC
Valid HTML 5 and Valid CSS