Has anyone replaced their valve cover gaskets?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Has anyone replaced their valve cover gaskets? [Re: ErikB] #1020455 10/03/11 04:05 AM

Joined: Jan 2005

Posts: 35

South central Illinois

Winkel1

Getting the Wheeling Fever

Will I need intake gaskets as well or are they reuseable with a little sealant?

Does anyone know of a write-up anywhere on the internet? I have a Haynes manual but it's not very good.

98 T100 SR5 4WD
Rhino Liner
Warn Hubs
Mostly Stock

Entire Thread
Subject	Posted By	Posted
Has anyone replaced their valve cover gaskets?	Winkel1	02/12/11 05:58 AM
Re: Has anyone replaced their valve cover gaskets?	Greg_Canada	02/14/11 08:46 PM
Re: Has anyone replaced their valve cover gaskets?	ErikB	02/15/11 08:03 PM
Re: Has anyone replaced their valve cover gaskets?	Winkel1	10/03/11 04:05 AM
Re: Has anyone replaced their valve cover gaskets?	ErikB	10/03/11 06:24 PM
Re: Has anyone replaced their valve cover gaskets?	DKaz63	10/07/11 10:09 PM
Re: Has anyone replaced their valve cover gaskets?	95T100	10/21/11 01:15 AM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.446s Queries: 16 (3.361s) Memory: 0.6067 MB (Peak: 0.6396 MB) Data Comp: Off Server Time: 2026-05-26 02:28:08 UTC
Valid HTML 5 and Valid CSS