I've in the middle here and dong fairly well so far. Everythings off including the large 36 mm nut and the three 13mm 12pt bolts from the rear. I've been soaking everything down with PB really well since yesterday and I've begun to pound on the next part to get it off, but I thought I should ask some advice here since I've been pounding fairly hard and nothing is giving way yet.

Below is a pic of where I'm at now. As I've not had any of this apart before I'm sort of just feeling my way around here. Where I've drawn the red line is where I think the pieces should separate, and where I've drawn the green lines is where I've been pounding with my BFH, from the back side, although nothings budged so far.

My concern is that when I'm pounding it's shaking the entire suspension system and everything, and not coming off, which makes me think I've missed a bolt or something. Looking at my pics can anybody confirm that I just need to keep soaking at the red line with PB and pounding with my BFH?

I've got a kind of pry bar I could stick where the red line is. Should I try to pound the pry bar in a little and then pry the pieces apart?

Thanks