Gotta do a clutch job.....

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Gotta do a clutch job..... [Re: flyinhawaiian] #1021818 02/28/11 03:49 PM

Joined: Nov 1999

Posts: 1,049

Pasadena, CA. USA

toyrunner

Body Damage is Cool

Pull the output flange and lightly coat silicone n the splines. Re torque nut and stake it. No more leak! <img src="/forums/images/graemlins/kewl.gif" alt="" />

1985 SR5 4Runner
eLocked with Carter Lock
4.7:1 single case
Davez Offroad twin stick

Entire Thread
Subject	Posted By	Posted
Gotta do a clutch job.....	flyinhawaiian	02/28/11 08:17 AM
Re: Gotta do a clutch job.....	flyinhawaiian	02/28/11 08:34 AM
Re: Gotta do a clutch job.....	toyrunner	02/28/11 03:49 PM
Re: Gotta do a clutch job.....	flyinhawaiian	02/28/11 06:30 PM
Re: Gotta do a clutch job.....	4Crawler	02/28/11 06:50 PM
Re: Gotta do a clutch job.....	flyinhawaiian	03/01/11 07:38 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.194s Queries: 16 (4.190s) Memory: 0.6037 MB (Peak: 0.6367 MB) Data Comp: Off Server Time: 2026-11-15 00:46:18 UTC
Valid HTML 5 and Valid CSS