|
|
|
|
 Re: Answered question: Front Addco/stock rear vs. F/R Addcos
#102226
11/21/02 12:52 PM
|
Joined: Mar 2002
Posts: 176
OP
Wheeler
|
I got the Addco bars from Performance Products. I ordered them before the 15% off sale started so when they sent the front bar it was still $157.00. By the time the sale started they still had not sent the rear bar so I called and got them to reduce the cost by 15%. Ended up at around $100.00
On both bars I'm using the Energy Suspension bushings with the Zirc fittings so I can re-grease them w/o taking them off. Everything I did came from either Gadget's site or Jalaber's site.
For the front endlinks I swapped out the rubber stock bushing for the black endlink bushings that came with the "rear" bar. I left the rear endlink stock bushing in place.
http://community.webshots.com/user/medmaker100Wheelwell lights, PIAA 959's under valance, Grant Burlwood steering wheel, Bilsteins X 4, Michelin Cross Terrain SUV's, Clear Bumpers, Deckplate, Front/Rear Addco bars, 1.5 Lift on a 4X2
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.466s Queries: 15 (3.464s) Memory: 0.5992 MB (Peak: 0.6321 MB) Data Comp: Off Server Time: 2026-06-16 12:00:37 UTCValid HTML 5 and Valid CSS 