Crank Pulley Bolt

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Crank Pulley Bolt [Re: fasteddy] #1022488 04/13/11 03:43 AM

Joined: Feb 2005

Posts: 1,511

Phoenix, AZ

ryany

Body Damage is Cool

I use one of these:

http://www.brandsplace.com/0246-kd-3471.html

Find a couple of bolts that fit snugly in the crank pulley holes (they're not threaded so you need bolts that are close to the diameter of the holes) and hold the tool with one hand while you pull on your torque wrench with the other.

95 Montero SR
3.8 MIVEC, Advance headers, 2 1/2" exhaust, Magnaflow muffler, OME shocks & rear springs, 2" body lift, 3" tank lift, 4.90s, TRE front locker, factory rear locker, Roger Brown Rock Sliderz, 315/75r16 (35") tires, Sport big brakes

Entire Thread
Subject	Posted By	Posted
Crank Pulley Bolt	leadheavy52	03/09/11 12:10 AM
Re: Crank Pulley Bolt	4ePikanini	03/09/11 07:20 AM
Re: Crank Pulley Bolt	KrzyDav	03/10/11 06:24 AM
Re: Crank Pulley Bolt	leadheavy52	03/10/11 01:27 PM
Re: Crank Pulley Bolt	4ePikanini	03/11/11 02:12 PM
Re: Crank Pulley Bolt	leadheavy52	04/13/11 02:07 AM
Re: Crank Pulley Bolt	fasteddy	04/13/11 02:40 AM
Re: Crank Pulley Bolt	ryany	04/13/11 03:43 AM
Re: Crank Pulley Bolt	4ePikanini	04/13/11 06:59 AM
Re: Crank Pulley Bolt	FrankR	04/13/11 11:34 AM
Re: Crank Pulley Bolt	leadheavy52	04/18/11 11:15 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: