|
|
|
|
 Re: Can't get snap ring on cv half shaft
[Re: Tag]
#1023000
03/17/11 03:53 PM
|
Joined: Mar 2011
Posts: 37
OP
Getting the Wheeling Fever
|
Do you have your upper balljoint connected? Yes all the connections to the knuckle are made...until I take them apart in a few moments. <img src="/forums/images/graemlins/frown.gif" alt="" />
|
|
|
Re: Can't get snap ring on cv half shaft
[Re: Darrell]
#1023001
03/17/11 08:18 PM
|
Joined: Mar 2011
Posts: 37
OP
Getting the Wheeling Fever
|
Job done! <img src="/forums/images/graemlins/smile.gif" alt="" /> I did indeed have this ring backwards. The way it is tapered made the difference. Once it was installed correctly the snap ring was a piece of cake. Thanks for all the help. I hope this helps someone! ![[Linked Image]](https://s3.amazonaws.com/MiscPhotos/IMG_2333_edited-1.jpg) ![[Linked Image]](https://s3.amazonaws.com/MiscPhotos/IMG_2334_edited-1.jpg)
|
|
|
Re: Can't get snap ring on cv half shaft
[Re: Darrell]
#1023002
03/17/11 09:56 PM
|
Joined: Jul 2009
Posts: 1,342
Body Damage is Cool
|
That brass ring makes a huge difference on which side is out. it is good you got the c clip on. I did forget one thing. I put a little bit of grease in the groove to help it to slide on.
91 Montero LS "Sandstorm", Auto, Dual Bouncy Seats, 2" Suspension lift, 2" Body Lift, GENII front IFS, 32" MT tires
89 Raider "Trailbreaker", 3.0, Auto, Dual Bouncy Seats
|
|
|
Re: Can't get snap ring on cv half shaft
[Re: Darrell]
#1023003
03/17/11 09:56 PM
|
Joined: Jan 2000
Posts: 16,227
Web Wheeler
|
Job done! <img src="/forums/images/graemlins/smile.gif" alt="" />
I did indeed have this ring backwards. The way it is tapered made the difference. Once it was installed correctly the snap ring was a piece of cake.
Thanks for all the help. I hope this helps someone! Awesome! Yup, will probably help me as I'll be doing my CV's pretty soon too.
|
|
|
Re: Can't get snap ring on cv half shaft
[Re: off-roader]
#1023004
03/18/11 12:26 AM
|
Joined: Jan 2001
Posts: 3,876
Roll Me Over
|
I repacked my bearings many times. Sadly I do not have my Raider any longer. Still come on here as if I do though. Glad I could help. <img src="/forums/images/graemlins/kewl.gif" alt="" />
89 2dr 3.0 AT, manual hubs. 33x12.5 MT gen 2 coils,Cranked front tbars Dons rocker protection, Front/Rear Bumpers. ARB rear locker, 2" BL, Beefed up skid plates/trailing arms. Gen II uca, 2 Bouncy seats www.youtube.com/TagGeorge
|
|
|
|
|
|
