I havent had a chance to take the pulley off yet, but after i took the belt off the pulley would spin fine. But like I said earlier, the noise only happens after the engine has been ran for a few minutes. I did put a mechanics stethoscope and checked a few places before i took the belt off. You can hear the scraping noise the loudest by putting the stethoscope on the nut that holds that idler pulley on. If the bearing is not completely worn out, how do i grease it? Sorry if thats a dumb question.

Thanks for the help 4crawler!!!

Last edited by Brimt; 03/23/11 04:06 AM.
Big T