Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
look what i dragged home. #1023626 03/22/11 04:00 AM
Joined: Jan 2003
Posts: 1,741
powerRam50 Offline OP
Body Damage is Cool
[Linked Image]

87 raider for 400 bucks.going to use it as a parts truck for both d-50s and the Monty.going to convert the Monty to a stick shift too.i might take the 4.6 gears out of it for the wife's d-50 because it has a LSD,then sell her 4.875 gears.it will be sad to see such a clean raider get scrapped out but the parts will keep 3 rigs in the mud.


87 dodge power ram 50,35" tires,5 1/2" total lift,4.6 gears,lockers front and rear,Rancho RS5000's,custom front bumper,custom rock sliders,cct extended diff breathers,75 amp alt(40 amp stock),thorely header,K&N,wheeled hard...
Re: look what i dragged home. [Re: powerRam50] #1023627 03/22/11 04:07 AM
Joined: Jan 2003
Posts: 1,741
powerRam50 Offline OP
Body Damage is Cool
[Linked Image]


87 dodge power ram 50,35" tires,5 1/2" total lift,4.6 gears,lockers front and rear,Rancho RS5000's,custom front bumper,custom rock sliders,cct extended diff breathers,75 amp alt(40 amp stock),thorely header,K&N,wheeled hard...
Re: look what i dragged home. [Re: powerRam50] #1023628 03/22/11 04:25 AM
Joined: Mar 2003
Posts: 2,324
K
KrzyDav Offline
Body Damage is Cool
*****
at least it will live again and not go to china to be melted down.


dave h.
'89 Raider V6 5spd;Aisin Hubs;; Gen2 LS: frt. brakes, rear coils;U.C.arms;R.trailing arms;idler arm; rear LSD axle w.disc brakes ;2 battery system for Dog's fan; relocated ECU; custom bumpers;J.Baker receiver;Conferr roofrack; t-bar crank.
Re: look what i dragged home. [Re: powerRam50] #1023629 03/22/11 04:27 AM
Joined: Feb 2005
Posts: 7,458
rxinhed Offline
Trail Leader
*****
I have hacked and parted nicer-type Montys, too. Alas for the individual vehicle. So...answer my question in the other thread: How do I fit 33" muds on my new MM without a body lift or hacking the fenders?


1987 Raider - Roxy
1988 Mighty Max 2.6L Turbo - Pearl
1997 Mountaineer V8 - Freddy
2000 Excursion V10 - Freya
Re: look what i dragged home. [Re: rxinhed] #1023630 03/22/11 04:45 AM
Joined: Jan 2003
Posts: 1,741
powerRam50 Offline OP
Body Damage is Cool
not going to happen.31's will fit if you crank the t bars but depending on backspacing of the rims will rub.mine worked but on the wifes d-50 she had to trim to fit 31's,with cranked t bars.33's will fit with a body lift and t bar lift with out cutting but it will take both.


87 dodge power ram 50,35" tires,5 1/2" total lift,4.6 gears,lockers front and rear,Rancho RS5000's,custom front bumper,custom rock sliders,cct extended diff breathers,75 amp alt(40 amp stock),thorely header,K&N,wheeled hard...
Re: look what i dragged home. [Re: powerRam50] #1023631 03/22/11 04:49 AM
Joined: Feb 2005
Posts: 7,458
rxinhed Offline
Trail Leader
*****
Hmm. TY <img src="/forums/images/graemlins/kewl.gif" alt="" />

Re: look what i dragged home. [Re: rxinhed] #1023632 03/22/11 05:02 AM
Joined: Jan 2003
Posts: 1,741
powerRam50 Offline OP
Body Damage is Cool
maybe doing the montero gen 2 upper control arms,cutting the upper bumb stops,reindexing the t bars then cranking to hell might if you are lucky but it is iffy.i have not tried the gen2 control arms but i want to.


87 dodge power ram 50,35" tires,5 1/2" total lift,4.6 gears,lockers front and rear,Rancho RS5000's,custom front bumper,custom rock sliders,cct extended diff breathers,75 amp alt(40 amp stock),thorely header,K&N,wheeled hard...







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 3.862s Queries: 15 (0.008s) Memory: 0.6194 MB (Peak: 0.6938 MB) Data Comp: Off Server Time: 2026-07-16 09:36:02 UTC
Valid HTML 5 and Valid CSS