Ok, dudes, I have been making progress over the last couple of days here. The heads are re assembled and the Timing is about ready to be set. While we were changing the front main seal we discovered the crank key was about to sheer itself from the crank and grenade the engine <img src="/forums/images/graemlins/scared.gif" alt="" />. Dealer had one in stock here in mesa so I bought the new key and had J pick it up for me on his way home today. So the timing should be just about ready to get set up and the major stuff will be done with this motor. The lloyd tero is at my house by the way so it should be able to be dropped in over the course of a few days once the motor is completed.

Quick question lloyd, who did you buy the new lifters from. There is no issue's with them but I need some for my motor and the Dealer wants almost $900 for all 24 <img src="/forums/images/graemlins/barf.gif" alt="" />.

I believe THESE are the correct ones from a link I saved a while back on this subject. The original listing had expired, but I typed in the same info and came up with this model. Says they are 3rd design, 3mm oiler lifters.

The seller is engnbldr; he's on here. Contact him directly via PM.

John B.

Good catch JBFP. I didn't even notice that!

Ye, they came from Engbldr. Cannot beat that deal.

Thanks guys, Lloyd, Your motor is timed. Gonna try to make some more progress tonight. <img src="/forums/images/graemlins/kewl.gif" alt="" />

Here's a local source if you need them quicker.

http://www.store.partsdinosaur.com/page213.html

Merry Christmas AZ Crew, and to all a New Trail <img src="/forums/images/graemlins/patriot.gif" alt="" />

Thanks lloyd! <img src="/forums/images/graemlins/smile.gif" alt="" />

Any Updates....