|
|
|
|
 Re: Progress!
[Re: Lloyd Swartz]
#1024208
03/30/12 03:50 PM
|
Joined: Nov 2004
Posts: 1,242
Body Damage is Cool
|
might be easier to send them my way. I'll PM you my address. Saturday afternoon Pat is gonna come over and Were gonna put the T-case in....YAAAAAY! <img src="/forums/images/graemlins/kewl.gif" alt="" /> <img src="/forums/images/graemlins/kewl.gif" alt="" /> <img src="/forums/images/graemlins/kewl.gif" alt="" />
!!!!!!!!!!!!!WHAT ABOUT BOB!!!!!!!!!!!!!!!
|
|
|
Re: Progress!
[Re: PA_JERO]
#1024209
03/30/12 06:18 PM
|
Joined: Jan 2002
Posts: 6,134
OP
Trail Leader
|
So does that mean you won't be helping me move the diesel to the ground for a test run?
1999 Montero SAS'd on Kings and stuff
1998 Montero trying to get a V8 Swapped
|
|
|
Re: Progress!
[Re: TOASTY]
#1024210
03/30/12 11:27 PM
|
Joined: Nov 2004
Posts: 1,242
Body Damage is Cool
|
I still plan on helping you...dude! Dust... Wind.... Dude... <img src="/forums/images/graemlins/smile.gif" alt="" />
!!!!!!!!!!!!!WHAT ABOUT BOB!!!!!!!!!!!!!!!
|
|
|
Re: Progress!
[Re: PA_JERO]
#1024211
03/31/12 04:25 AM
|
Joined: Jan 2000
Posts: 8,160
Web Wheeler
|
Let me know how it bolts up.......I will look at 2" spacers tomorrow to order.
|
|
|
Re: Progress!
[Re: PA_JERO]
#1024212
04/01/12 05:38 AM
|
Joined: Dec 2005
Posts: 593
Rock Warrior
|
I still plan on helping you...dude!
Dust...
Wind....
Dude...
That is so crates. If I weren't balls deep in getting this Galant back together and down the road, I'd be up to lend a hand. Gotta get familiar with how these things come apart and go back together sooner than later, methinks.
Brian DR1665 | GBXM | Gearheads United. 89 Raider SWB [rock] | 91 Galant VR4 [roller]
|
|
|
Re: Progress!
[Re: DR1665]
#1024213
04/01/12 02:43 PM
|
Joined: Jan 2000
Posts: 8,160
Web Wheeler
|
Someone want to measure what the center bore needs to be on those wheel spacers? Measure across the hub rim to rim...
1996 SR From the Area 51 Skunk Works. 37"BFG Tires, 5" lift, Rock Track 4:1 Case, Tom Woods Drive Shafts, Oasis Air, Front ARB, lifted gas tank, T-max winch and lots of stuff that cost too much.
|
|
|
Re: Progress!
[Re: Lloyd Swartz]
#1024214
04/01/12 05:57 PM
|
Joined: Jan 2000
Posts: 16,227
Web Wheeler
|
Someone want to measure what the center bore needs to be on those wheel spacers? Measure across the hub rim to rim... The center bore needs to be 108mm. Most spacers I've seen have smaller bores. You can usually tell just by looking if it's the right size if the hole for the lug nut almost touches the center bore hole. There is usually no more than ~1/8" (I'd say 1/16" is what I recall seeing) between the holes. See the spacer pic I posted from trailgear.com above. HTH <img src="/forums/images/graemlins/kewl.gif" alt="" />
|
|
|
Re: Progress!
[Re: JohnnyBfromPeoria]
#1024216
04/01/12 06:03 PM
|
Joined: Jan 2000
Posts: 16,227
Web Wheeler
|
Yup or 4.251969" if you wanna be more exact. 108mm is the actual spec IIRC. The difference could mean having to grind them down for clearance.
|
|
|
Re: Progress!
[Re: off-roader]
#1024217
04/01/12 08:03 PM
|
Joined: Nov 2004
Posts: 1,242
Body Damage is Cool
|
I have some pictures but I don't think I'm even gonna bother posting them due to it being from a crappy blackberry camera. You can hardly tell whats going on in the picture. LT and I put the new tail housing on and also put the rubicon case in and It fits right up in there. Couple things we'll have to do it fab up a new tranny mount and get some hardware. Pat I think has a few other things that we need to do but the test fit is done and lengths have been measured for driveshafts. Motor is pretty much all put together except the Radiator, starter and air box, oh and torque converter bolts but pretty minor stuff. lloyd that ARB fridge works great!!! <img src="/forums/images/graemlins/kewl.gif" alt="" /> Thanks.
!!!!!!!!!!!!!WHAT ABOUT BOB!!!!!!!!!!!!!!!
|
|
|
|
|
|
