1.5" should be enough and give it a good stance. We should check to make sure the spacers don't require a special lug nut or anything, or at least come with the hardware to adapt the spacer to the stock spindle. If not I have a kick <img src="/forums/images/graemlins/butwiggle.gif" alt="" /> hardware store down the road from here.

Also, Whats the situation with the 4:90's. Are we gonna be putting these in if we find some? I know Pat and I found a set that would work for the front but the Rear was a different story. I will need to double check all of this to find out if the yard still has them.