Ok, we are mailing the pressure switch for the air tank we forgot to send and a check for 750.00 for parts needed still.(drive shafts, gears and misc) Use that up and let me lnow were we stand.

Should I order Sequoia spring spacers as well...

I would.

John B.

Well ok then....

Johnny had one job to do, i think he just did it...

Well that was fun. The first 20 hits were all some sort of scam <img src="/forums/images/graemlins/scared.gif" alt="" /> Ended up ordering them off Ebay. Not cheap little suckers.

You made the right move, Lloyd.

I'll celebrate with a BIG FLAT. It's the official beer of the AZ Crew.

John B.

This AzCrewer doesn't drink BEER, straight whiskey or RUMMMM! (rhymes with yum)

Just back home from the yards today. <img src="/forums/images/graemlins/angry.gif" alt="" />... I had a smokin deal going for a front set of 4:90's. Then this other A Hole came out 10 min after me and toast started pulling it and jacked me up another $150. So me and toast gave him the bird and chucked a bunch of rocks through the glass that was still good on the truck and walked out <img src="/forums/images/graemlins/scared.gif" alt="" />. Not really the rock through the window thing but we were angry and walked out. All well, If it boil's down to it I can go back if they let me. Any how. Unsuccesful.

On another note. I text pat last night and he said to expect $450 for each drive shaft. So roughly $900 to $1000 for the drive shafts. Me and adam talked about it and We think we can make the 750 work for 4:90's. Are hope is to get the Front gears from a junk yard to lighted up the cost. But the Rear may have to be dealer purchased. I will do a bit more research to see if I can get this stuff cheaper.

Does any one have the dealer part # for a SR 4:90 Rear ring and pinion???

Oh and I got the spacers in the mail lloyd. <img src="/forums/images/graemlins/kewl.gif" alt="" />

Holy crap them are some expensive shafts! I assume they are bomb proof....