Axle nut

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Axle nut [Re: rxinhed] #1026045 04/05/11 05:07 AM

Joined: Jan 2001

Posts: 13,649

Helen , GA

fasteddy

Web Wheeler

It's a fairly std machine shop task to press/cut off the old bearing race or bearing retainer and press on a new one. Don't skimp on quality, and do a new seal.

Not responsible for advice not taken...

Entire Thread
Subject	Posted By	Posted
Axle nut	Brad_Thurston	04/04/11 06:02 PM
Re: Axle nut	KrzyDav	04/04/11 11:08 PM
Re: Axle nut	rxinhed	04/04/11 11:24 PM
Re: Axle nut	fasteddy	04/05/11 05:07 AM
Re: Axle nut	Brad_Thurston	04/05/11 10:02 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.550s Queries: 16 (3.547s) Memory: 0.6001 MB (Peak: 0.6331 MB) Data Comp: Off Server Time: 2026-06-12 19:13:48 UTC
Valid HTML 5 and Valid CSS