Transfer case compatibility

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Transfer case compatibility [Re: evileric] #1026288 04/11/11 01:15 AM

Joined: Jul 2010

Posts: 29

Concord,NC

evileric

Getting the Wheeling Fever

I want to use Marks4wd 3.15 gears in the gen 2 tcase. Also, i've tried looking and searching, where do you get the 5.29 diff gears?

1995 Montero SR factory air locker,33x12.50x15 At's

Entire Thread
Subject	Posted By	Posted
Transfer case compatibility	evileric	04/11/11 12:44 AM
Re: Transfer case compatibility	evileric	04/11/11 01:15 AM
Re: Transfer case compatibility	TOASTY	04/11/11 03:45 AM
Re: Transfer case compatibility	evileric	04/11/11 04:06 AM
Re: Transfer case compatibility	TOASTY	04/11/11 07:21 AM
Re: Transfer case compatibility	evileric	04/11/11 03:45 PM
Re: Transfer case compatibility	TOASTY	04/11/11 06:40 PM
Re: Transfer case compatibility	evileric	04/12/11 12:57 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.491s Queries: 16 (3.489s) Memory: 0.6078 MB (Peak: 0.6408 MB) Data Comp: Off Server Time: 2026-06-23 23:06:33 UTC
Valid HTML 5 and Valid CSS