|
|
 22RTE turbo tranny question
#1026571
04/14/11 04:31 PM
|
Joined: Mar 2003
Posts: 28
OP
Getting the Wheeling Fever
|
I"m doing some investigating and have a question on the output shaft. Is the main output shaft (inside the bell housing) a 23 spline...or is it just the shaft for the transfer case...or both?
Thanks much,
DJN
|
|
|
Re: 22RTE turbo tranny question
[Re: DJN]
#1026572
04/14/11 04:39 PM
|
Joined: Aug 2003
Posts: 2,854
Roll Me Over
|
Do you mean main input shaft in the bellhousing?
89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim
|
|
|
Re: 22RTE turbo tranny question
[Re: DJN]
#1026573
04/14/11 06:13 PM
|
Joined: Mar 2003
Posts: 28
OP
Getting the Wheeling Fever
|
yeah, the shaft in the bell housing that connects to the clutch disc
|
|
|
Re: 22RTE turbo tranny question
[Re: DJN]
#1026574
04/14/11 07:19 PM
|
Joined: Aug 2003
Posts: 2,854
Roll Me Over
|
Hrm..... don't know for sure, but why are you looking for this info? It's the same spline as the shaft in the r150f and r154 in the supra turbos.
The reason the output shaft is 23spline, is because there is way more stress there than at the input shaft (because of torque multiplication through the gears)...
89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim
|
|
|
Re: 22RTE turbo tranny question
[Re: Greg_Canada]
#1026575
04/20/11 03:13 AM
|
Joined: Feb 2001
Posts: 3,935
Roll Me Over
|
input spline on an R150 is 23 spline. Highly likely that the 151 is the same, but check w/ Marlin.
Brian K. Gallus
I have nothing important to say.
|
|
|
|
