|
|
|
|
 Anyone ever replace.......
#1027225
04/26/11 02:49 AM
|
Joined: Apr 2006
Posts: 46
OP
Getting the Wheeling Fever
|
The camshaft plug? I just replaced the valve cover gaskets and I still have an oil seep. I also replaced the RTV on the little half moon aluminum piece but have a seep from behind the cam on each head. The part is #14 in this illustration. I have to replace them and want to do it without removing the heads. Anyone done it and have any advise?? Thanks. http://www.trademotion.com/partlocator/i...p;Sectionids=10,4117&groupid=10007&subgroupid=61318&componentid=0&make=34&model=T100&year=1996&graphicID=F809084&callout=14&catalogid=1&displayCatalogid=0
|
|
|
Re: Anyone ever replace.......
[Re: toyotadriver]
#1027226
04/27/11 05:46 AM
|
Joined: Feb 2007
Posts: 476
Mudrunner
|
Can't see the image or link... <img src="/forums/images/graemlins/frown.gif" alt="" />
1998 T-100 Xtra cab SR5 2WD Auto; Roadmaster Active Suspension; Yokohama Geolander HT-S; lowered air dam; full belly pan; 4? diffuser; 11" side skirts; dual transmission coolers; 67% grill blocked; Auto-RX'd; ScanGauge II/Ultra-Gauge
|
|
|
Re: Anyone ever replace.......
[Re: ErikB]
#1027228
04/29/11 01:55 AM
|
Joined: Apr 2006
Posts: 46
OP
Getting the Wheeling Fever
|
Thanks for the info. I think that I'd have to pull the valve covers again. I'll probably clean it super well and then spread a little RTV on it and call it good. It's a slight seep and not a true leak. Just bugs me.
|
|
 Re: Anyone ever replace.......
[Re: toyotadriver]
#1027229
04/30/11 06:26 PM
|
Joined: Feb 2007
Posts: 476
Mudrunner
|
Make sure you allow it to setup before you torque it down. It may be squeezing out the RTV if it's not set when you torque it down. <img src="/forums/images/graemlins/wink.gif" alt="" />
1998 T-100 Xtra cab SR5 2WD Auto; Roadmaster Active Suspension; Yokohama Geolander HT-S; lowered air dam; full belly pan; 4? diffuser; 11" side skirts; dual transmission coolers; 67% grill blocked; Auto-RX'd; ScanGauge II/Ultra-Gauge
|
|
|
Re: Anyone ever replace.......
[Re: toyotadriver]
#1027230
05/05/11 05:11 PM
|
Joined: Aug 2002
Posts: 65
Getting the Wheeling Fever
|
I just changed my valve cover gaskets and I did not replace this seal. I don't see how you'd do it without taking the valve covers off again. And I see why you don't want to take them off again.
97 T100 4WD SR5 - 231K
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 4.057s Queries: 15 (0.004s) Memory: 0.6089 MB (Peak: 0.6789 MB) Data Comp: Off Server Time: 2026-06-07 11:39:37 UTCValid HTML 5 and Valid CSS 