Source for rubber bumpers on A-arm.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Source for rubber bumpers on A-arm. [Re: Snowtoy] #1027269 04/27/11 09:05 PM

Joined: Sep 2005

Posts: 970

Winston-Salem NC

RatLabGuy

Rock Warrior

Poly Performance sells them in both rubber and polyurethane IIRC.
The truth is any aftermarket version will work, IIRC in the frame it is just a hole, the rubber is like a stopper wit ha bolr stud sticking out, this goes through teh hole and a nut goes on other side.

With 200+ Billion electrical parts, the world most complicated machine is inside your own skull.

Question Reality.
-----------------------------
'89 Rnr DLX "SR4.5", 32s w/ 5.29 locked f/r blah blah

Entire Thread
Subject	Posted By	Posted
Source for rubber bumpers on A-arm.	EtienneNavaar	04/27/11 05:29 AM
Re: Source for rubber bumpers on A-arm.	Snowtoy	04/27/11 06:49 AM
Re: Source for rubber bumpers on A-arm.	RatLabGuy	04/27/11 09:05 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.489s Queries: 16 (3.487s) Memory: 0.5965 MB (Peak: 0.6295 MB) Data Comp: Off Server Time: 2026-06-04 23:59:56 UTC
Valid HTML 5 and Valid CSS