I think I've got some coming from the rear cam caps, but not all of it. I just can't see in there enough to tell. I'll have to give it another look. The oil looks too black on the pavement (the engine oil is still very clean) - so that's got me puzzled, too. The engine is clean (cleaned it well before putting it in), so don't know why the oil would be black from running down the exterior. Unless some of it is running from the rear main and picking up some of the black trash from the inside of the bell housing. Just not sure... I'll try to check it out this weekend. Thanks for the baby powder tip - I think I might try some foot powder spray, if I can find some cheap. Otherwise, I'll go with baby powder. Back behind the heads it will be hard to see even with the powder - I guess I'll have to break out a mirror.

On another note, does anyone have a good source for the big rubber "gasket" that is on the master cylinder? You know, the brake master cylinder, under the cap? Mine is completely trashed and it's leaking fluid. If someone could turn me on to an economical source, I would appreciate it.

Thanks!

Edit: I see Dorman makes round gaskets # 42081, 42072, 42098, 42104 - these are all for Ford, Dodge, Chevy...didn't see the D50 listed under the Dodge application for 42081. I'll see if I can find diameters for these things somewhere... OR, if anyone knows where to get diameters or even knows which one will fit a 90 mighty max, then please let me know!

<img src="/forums/images/graemlins/kewl.gif" alt="" />