idler tensioner pulley

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

idler tensioner pulley #1028931 05/23/11 03:51 AM

Joined: Jun 2010

Posts: 70

N.C.

Brimt

Getting the Wheeling Fever

Okay guys i recently had to buy a new tensioner pulley for my fan belt, and i didnt pay close enough attention when i was taking it off. Can anyone tell me how those different pieces go back onto each side of the pulley? Theres a flat washer, A tube with a collar on it. and the 2 outside plates. Thanks in advance.

Big T

Entire Thread
Subject	Posted By	Posted
idler tensioner pulley	Brimt	05/23/11 03:51 AM
Re: idler tensioner pulley	kewlynx	05/23/11 05:12 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.123s Queries: 15 (3.488s) Memory: 0.5940 MB (Peak: 0.6269 MB) Data Comp: Off Server Time: 2026-06-13 02:27:32 UTC
Valid HTML 5 and Valid CSS