Quote
Those five codes, though, are the ones I was talking about previously. These are triggered when the solenoids - in your case - aren't there. You can wire resistors up in place of the solenoids and that will make the PCM happy. Thankfully, they're not smart enough to know the difference between a solenoid and a resistor. <img src="/forums/images/graemlins/wink.gif" alt="" /> smile Take a look at my PDF linked to above and look at page 8.

Are these the ONLY codes? No pending codes?

No driveability issues?

BTW, if you stumble across a LS '97 manual harness (both interior dash harnesses, and all the engine stuff, let me know!)

What year and model is your Sport? I wanted to double check that the resistors wouldn't be different.

Edward


Finally had time to take a good look at your notes and my wiring diagram. Looks like you have found me a cheap solution! So I just need a 12V 3ohm 50W resistor in place of each solenoid in the wiring diagram; 1,2,and 3(pin 120, 106, 130) paralleled, and 4, and 5(pin 107, 129) paralleled back to pin 77 and 89?

To answer your questions, those are the only trouble codes i found. No drive-ability issues, my Sport is a 2001 ES model.

Thanks for being so thorough in your research, and very well documented!

<img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" />

2001Sport 3.0-Headers-Cage-RoofChop-NP231/D300-D44/ARB-Ford9/Yukon/3Link-37's+H1's-PSC Assist-108:1