Weber carb install

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Weber carb install [Re: PhantomSky2] #1030593 06/22/11 08:01 PM

Joined: Aug 2008

Posts: 211

North Carolina

cdl1701

Wheeler

I hooked mine into the the plug where the original carb plugged in. I just found the hot wire and used that. Actually I cut the plug off of the old carb and attached it to the choke wire so that it would make a cleaner look.

88 Montero, 2.6 Black

Entire Thread
Subject	Posted By	Posted
Weber carb install	PhantomSky2	06/22/11 03:59 PM
Re: Weber carb install	cdl1701	06/22/11 08:01 PM
Re: Weber carb install	socal1200r	06/22/11 08:17 PM
Re: Weber carb install	plh	06/23/11 02:28 AM
Re: Weber carb install	Mudraider	06/23/11 02:35 AM
Re: Weber carb install	PhantomSky2	06/23/11 07:55 PM
Re: Weber carb install	Skibane	06/24/11 03:15 AM
Re: Weber carb install	zarktheshark	06/24/11 05:06 AM
Re: Weber carb install	Skibane	06/24/11 06:04 AM
Re: Weber carb install	PhantomSky2	06/25/11 08:59 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.506s Queries: 16 (3.503s) Memory: 0.6131 MB (Peak: 0.6460 MB) Data Comp: Off Server Time: 2026-06-05 22:44:33 UTC
Valid HTML 5 and Valid CSS