So here it is, the time has come to let her go. I just can't get time or motivated to get this project done so time to pass it on to someone else.

4.3L with auto and NP231 transfercase, 3" body lift.



Go here to see more pictures. http://s653.photobucket.com/albums/uu258/cdl1701/Raider/

Here is the list of what is left to do that I know of.
* Needs slip yolk eliminator and new rear drive shaft
* Gas tank needs to be cleaned out of old gas
* Needs new lower radiator hose
* Gauges need to be hooked up
* Main shifter needs detente adjusted
* Needs new spedo cable if using existing spedo. New transfer case uses
an electronic sending unit to control the spedo so if using stock spedo
will require this (http://www.gaugeguys.com/cablex.htm)
* Because this has set for so many years it would be a good idea to
repack the bearings and change out the differential fluids.
* AC is installed but needs valves put inline to charge.

I am asking $600 even though I have way more invested in just the swap portion of it. Let me know if there are any questions or need more pictures.

EDIT: 7/22. Having a hard time locating the title but if I can not find it I will get a new one. Should not be a problem.

Thanks
Chris