Test ignition module?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Test ignition module? [Re: fasteddy] #1032341 07/30/11 01:22 AM

Joined: May 2006

Posts: 709

89montero

Rock Warrior

looks like it's the timing belt. Went to swap the dist and realized the rotor doesn't spin when I crank the engine.

Kinda suspected this because when cranking it over it sounds funny, just hoping that wasn't it.

1989 Montero 4dr V6 3.0l

Entire Thread
Subject	Posted By	Posted
Test ignition module?	89montero	07/29/11 06:50 PM
Re: Test ignition module?	fasteddy	07/29/11 10:03 PM
Re: Test ignition module?	89montero	07/30/11 12:30 AM
Re: Test ignition module?	fasteddy	07/30/11 12:48 AM
Re: Test ignition module?	89montero	07/30/11 01:22 AM
Re: Test ignition module?	mxmikie	07/30/11 01:33 AM
Re: Test ignition module?	89montero	07/30/11 03:56 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.422s Queries: 16 (3.420s) Memory: 0.6058 MB (Peak: 0.6388 MB) Data Comp: Off Server Time: 2026-05-31 05:51:59 UTC
Valid HTML 5 and Valid CSS