94 2wd v6
Recently replaced plugs, wires, cap and rotor.
Jumpered the TE1 and E1 and set the timing.
Wasn't long after when my CEL came on.
Comes up with code 26.
Would timing play a part in this?
I'm now starting to wonder if I didn't let the truck warm up enough to set the timing correctly.
I'll set the timing again to verify and post back.
Any thoughts on what else to check?

Thanks in advance!
Todd

1986 Pickup extracab longbed "Woody edition"
SAS - 33's, 5.29's, lockright rear.

02 IS300 SportCross - my "DD"
94 2wd v6 extracab
04 Outback Wagon- wife's/family car