A light application of 30w oil for the head bolt threads and under the bolt head - don't forget to wipe some oil from your fingers onto the washers - don't install until after a thorough cleaning of the bolt and block threads. Use a bottoming tap on the block holes. If you have a SOHC 3.0L, torque to 80 lb-ft.

Frank

'89 [color:"white"]G-Raider[color:"white"] [color:"black"]Supercharged 3.0L, MegaSquirt 2, lockup A/T, 2.5" exhaust, 172k, Cibie H4s/Oscar SCs, Hella Micro DE fogs, Cobra CB, Superwinch hubs, LSD rear/Aussie Locker front, Bilsteins, Lifeline AGM, Rust-Oleum