GEN2 volt meter shows around 13v

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: GEN2 volt meter shows around 13v [Re: fasteddy] #1033417 08/22/11 08:06 PM

Joined: Jun 2011

Posts: 32

Los Angeles

mike5

Getting the Wheeling Fever

I figured the readings from a voltmeter are accurate. But I like the idea of the gauge. Given this, is there something to change that can improve the accuracy?

Entire Thread
Subject	Posted By	Posted
GEN2 volt meter shows around 13v	mike5	08/20/11 07:31 AM
Re: GEN2 volt meter shows around 13v	xFezx	08/20/11 04:50 PM
Re: GEN2 volt meter shows around 13v	fasteddy	08/20/11 05:53 PM
Re: GEN2 volt meter shows around 13v	mike5	08/22/11 08:06 PM
Re: GEN2 volt meter shows around 13v	fasteddy	08/23/11 02:46 AM
Re: GEN2 volt meter shows around 13v	Scottie2113	08/23/11 03:19 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.552s Queries: 16 (3.549s) Memory: 0.6033 MB (Peak: 0.6363 MB) Data Comp: Off Server Time: 2026-06-21 16:06:42 UTC
Valid HTML 5 and Valid CSS