GEN2: hole in firewall to run wire?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

GEN2: hole in firewall to run wire? #1033985 09/09/11 01:33 AM

Joined: Jun 2011

Posts: 32

Los Angeles

mike5

Getting the Wheeling Fever

Are there any open holes from which I can run power wires or other wires into the cabin? Also, how do I remove the lower portion of the driver's side dash? I can get all the bolts out, but the release for the fuel door and hood are getting in the way. How do I remove or disconnect those two so I can get it out?

Entire Thread
Subject	Posted By	Posted
GEN2: hole in firewall to run wire?	mike5	09/09/11 01:33 AM
Re: GEN2: hole in firewall to run wire?	JohnnyBfromPeoria	09/09/11 01:41 AM
Re: GEN2: hole in firewall to run wire?	PHIL_	09/09/11 02:51 AM
Re: GEN2: hole in firewall to run wire?	mike5	09/09/11 07:35 AM
Re: GEN2: hole in firewall to run wire?	dadrab	09/09/11 03:56 PM
Re: GEN2: hole in firewall to run wire?	StockRaider	09/09/11 10:05 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.509s Queries: 15 (3.507s) Memory: 0.6034 MB (Peak: 0.6364 MB) Data Comp: Off Server Time: 2026-06-23 03:23:37 UTC
Valid HTML 5 and Valid CSS