Maybe this will help ..Makes me wonder what the car makers are thinking at times ... Mitsu clutch slaves And most slaves how in the hell do they think you can get the air out of them the way there made ....??? Air gets trapped in the end of the slave and will not move back to the bleeder

Try this .... Get the bleeder loose .. ( Not enough to piss fluid ..) ... REMOVE the slave from the truck ... Let it hang down from the hose ...(Anyone see were I'm going with this ...?? Air goes up like air in a soda in a glass..) ....Make sure the cap is off the master...Open the bleeder and let gravity take over ...It should and will run fluided very fast out the bleeder so be ready... Never touch the peddle ...."I" ..NEVER... touch a brake or clutch peddle when bleeding brakes or clutchs....You dont have too ...

I'll bet there still is air in the slave at the cup/boot ...In my years of gearbox work clutch bleedings a pain ..


Captain Gear Box

Hazardous Toys inc