|
|
|
|
 Re: Wiring Harness 3L 89 montero
[Re: hazy_daze]
#1034589
09/21/11 04:17 AM
|
Joined: Mar 2011
Posts: 37
OP
Getting the Wheeling Fever
|
Thanks. However I am still having a major problem. After I hooked this all up the truck started. I took it on a short test drive and less then a mile it died. No Spark, Pulled it home. Ready to fill with TNT and light it!
This is driving me nuts. I know the harness to the power transistor was bad, but I got another problem. The transistor tests ok, the coil tests ok. I put a rebuilt distributor on it about 6 months ago cause the optical sensor died.
|
|
|
Re: Wiring Harness 3L 89 montero
[Re: Darrell]
#1034590
09/21/11 05:10 AM
|
Joined: Mar 2011
Posts: 37
OP
Getting the Wheeling Fever
|
I think it is fixed. It was the coil. I had 2 problems. The Coil had not yet died. Now I need to figure out why it idles way too high! <img src="/forums/images/graemlins/kewl.gif" alt="" />
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.023s Queries: 15 (0.003s) Memory: 0.5946 MB (Peak: 0.6430 MB) Data Comp: Off Server Time: 2026-06-09 18:21:51 UTCValid HTML 5 and Valid CSS 
