|
|
|
|
Weber install HELP ????
#1035058
09/24/11 10:03 PM
|
Joined: Jul 2011
Posts: 40
OP
Getting the Wheeling Fever
|
I am installing my weber on my 1987 dodge raider and I have a bit of a hang up what do I do with the coolant hose that ran into the bottom of my old Mukini carb it plugged in at the bottom of the old carb and ran to a T coming out of the intake that goes to the heater not sure what to do with it also on my fuel pump I have 3 hoses one comes from the tank and goes into the fuel pump labeled (In) the other comes from the bottom side of the fuel pump labeled (out) it went to the old carb, the other is the problem it comes from the top of the fuel pump with no stamp on the fuel pump saying what it is I assume this is a vent hose, it also went to the old mukini carb, but what do i do with this hose if it is indeed a vent for the fuel pump???thanks for any help
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.554s Queries: 15 (3.552s) Memory: 0.5988 MB (Peak: 0.6318 MB) Data Comp: Off Server Time: 2026-06-13 13:20:02 UTCValid HTML 5 and Valid CSS