7" lift kit for the Pajero Gen 1

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 7" lift kit for the Pajero Gen 1 [Re: rxinhed] #1035194 10/06/11 07:36 PM

Joined: Mar 2006

Posts: 422

Flagstaff, Az

heathdogg

Mudrunner

Geez, that does not look like a simple kit to do. Lots of metal added to the vehicle. To bad it doesn't show the rear and if it is leaf or coil in the back.

Blacktero: 90 Montero Lwb V6 RS Model. 16" Toyota Alloy Rims, Dual Bouncy's; Gen II Front Rotors & Calipers; Rear LSD

Sraider: 87 Raider 2.6 base. Work yet to be done.

Entire Thread
Subject	Posted By	Posted
7" lift kit for the Pajero Gen 1	Lester	09/28/11 09:37 AM
Re: 7" lift kit for the Pajero Gen 1	rxinhed	09/29/11 01:00 AM
Re: 7" lift kit for the Pajero Gen 1	RECON45	09/29/11 02:06 AM
Re: 7" lift kit for the Pajero Gen 1	Mudraider	10/01/11 01:54 AM
Re: 7" lift kit for the Pajero Gen 1	rxinhed	10/01/11 03:32 AM
Re: 7" lift kit for the Pajero Gen 1	heathdogg	10/06/11 07:36 PM

Moderated by 4x4Wire, code33, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.453s Queries: 16 (3.451s) Memory: 0.6020 MB (Peak: 0.6349 MB) Data Comp: Off Server Time: 2026-06-03 02:52:32 UTC
Valid HTML 5 and Valid CSS