Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Anyone going to a partyard? #1036572 10/21/11 10:16 PM
Joined: May 2003
Posts: 2,049
S
Scottie2113 Offline OP
Body Damage is Cool
*****
If anyone is going to a partyard to get parts for their montero, can you snag me the driver door top screw cover (brown) for the interior door handle? I don't have any monteros near me in partyards and it's a very small plastic cover that is no longer available through dealer. Let me know if you can help.


97 Montero SR w/Mitsu Adj Shocks & Rear Diff Lock ARB Front Diff Lock 4.9 Ring/Pinion 3.15 transfer box 43:1 crawl ratio 2" suspen lift 2" body lift 2" Gas Tank Lift 35x12.5 MTRs 15x10 Wheels Rock Sliderz ARB front bumper w/12k winch Custom rear bumper
Re: Anyone going to a partyard? [Re: Scottie2113] #1036573 10/22/11 12:33 AM
Joined: Jun 2002
Posts: 6,211
JohnnyBfromPeoria Offline
Trail Leader
*****
I had some, but between Dylan and RyanY, all the interior goodies from the Montero of Justice are now gone.

John B.

Re: Anyone going to a partyard? [Re: Scottie2113] #1036574 10/22/11 07:14 AM
Joined: Sep 2011
Posts: 16
B
Blehaa Offline
Need a Spot
Im going tomorrow morning probably, ill let you know what I find

Re: Anyone going to a partyard? [Re: Blehaa] #1036575 10/22/11 11:50 AM
Joined: Apr 2006
Posts: 3,607
Mad_Scientist Offline
Roll Me Over
*****
I'm going this morning Scottie. There's a 95 there so will have a look <img src="/forums/images/graemlins/kewl.gif" alt="" />


'97 Montero 'LSR' - 4.6 gears & factory rear locker, 33" Procomp muds on 15x8 steelies, 50mm coil spacers, T-bar crank, Airlift, sans rear sway, 50mm rear frame & fuel tank lift, Aisins, ARB front bumper + 10k lb winch, 50mm DIY body lift, rock sliders, cut rear quarter panels...
Re: Anyone going to a partyard? [Re: Mad_Scientist] #1036576 10/23/11 01:51 PM
Joined: Apr 2006
Posts: 3,607
Mad_Scientist Offline
Roll Me Over
*****
No luck, sorry.


'97 Montero 'LSR' - 4.6 gears & factory rear locker, 33" Procomp muds on 15x8 steelies, 50mm coil spacers, T-bar crank, Airlift, sans rear sway, 50mm rear frame & fuel tank lift, Aisins, ARB front bumper + 10k lb winch, 50mm DIY body lift, rock sliders, cut rear quarter panels...
Re: Anyone going to a partyard? [Re: Mad_Scientist] #1036577 10/23/11 03:23 PM
Joined: May 2003
Posts: 2,049
S
Scottie2113 Offline OP
Body Damage is Cool
*****
Thx for checking!


97 Montero SR w/Mitsu Adj Shocks & Rear Diff Lock ARB Front Diff Lock 4.9 Ring/Pinion 3.15 transfer box 43:1 crawl ratio 2" suspen lift 2" body lift 2" Gas Tank Lift 35x12.5 MTRs 15x10 Wheels Rock Sliderz ARB front bumper w/12k winch Custom rear bumper







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 4.749s Queries: 15 (0.011s) Memory: 0.6126 MB (Peak: 0.6820 MB) Data Comp: Off Server Time: 2026-07-14 12:35:01 UTC
Valid HTML 5 and Valid CSS