so over the last week , I have been building my repair panels and today I was able to get them burnt in , rears as well





now with the rockers repaired , I was able to get the cab height finalized @ 9" from the rockers to the Ground . + I also started on the cab mounts
Because there are only going to be 4 mounts instead of 6 , I wanted to make sure there were going to be strong .
cut out some 3/16" plate and surrounded it with some tube


Tacked into place I will add some more supports later , when I turn the frame over .



1 more front frame mount tomorrow , then I can get on the front cab mount


.